Custom configured, quickly delivered!
Your shopping cart is empty Shopping Cart
Buy Online or Call 800-237-0402
Search
IT Creations Partners

Gigabyte R264-S30 Server - System Overview

Gigabyte R264-S30 server front

On the front of the 2U Gigabyte R264-S30 there are 12x 3.5-inch drive bays that can be configured with either 3.5” or 2.5” Gen5 NVMe, SATA, or SAS4 drive types. SAS drives require a SAS card and will operate with a data transfer rate of up to 24Gb/s. Intel Virtual RAID on CPU or VROC is also supported for limited RAID. There are 2x PCIe Gen5 x2 slots on the motherboard for 2280 and 22110 form factor M.2 drives but one of them is shared with a SATA bus. The system offers 1x OCP 3.0 Gen5 x16 slot and a single riser card with 1x FHHL PCIe Gen5 x16 slot.

Gigabyte R264-S30 server rear I/O

Powering the machine, are dual redundant 1600W 80 Plus Titanium power supplies on the rear of the chassis. The R264-S30 comes with the Gigabyte Management Console pre-installed, making it ideal for managing individual systems or small clusters. For larger deployments, Gigabyte provides the Gigabyte Server Management (GSM) tool, which enables real-time monitoring and management of server health through an intuitive, web-based interface.

Request A Quote

Gigabyte R264-S30 Server - Specifications

Processor - Single Socket
  • Intel Xeon 6 Processor
  • Intel Xeon 6700 series E-Cores
  • Intel Xeon 6700 series P-Cores (available Q1'25)
  • Intel Xeon 6500 series P-Cores (available Q1'25)
  • Single processor, TDP up to 350W

  • 1 x LGA 4710
  • Socket E2
  • System on Chip
  • Motherboard: MS34-DC0
Memory
  • 16x DIMM slots
  • DDR5 memory supported
  • 8-Channel memory architecture
  • MCR DIMM supported
  • RDIMM: Up to 6400 MT/s (1DPC), 5200 MT/s (2DPC)
  • MCR DIMM: Up to 8000 MT/s

  • *MCR DIMMs are only supported with Intel Xeon 6 Processors with P-Cores and in a 1DPC configuration.
Storage
    Front Hot-Swap:
  • 12 x 3.5"/2.5" SATA/SAS4

  • Internal M.2:
  • 1 x M.2 (2280/22110), PCIe Gen5 x2
  • 1 x M.2 (2280/22110), PCIe Gen5 x2, disabled for SATA

  • *SAS card is required to support SAS drives.
LAN
    Rear:
  • 1 x 1Gb/s LAN (1 x Intel I210-AT)
  • Supports NCSI function
  • 1 x 10/100/1000 Mbps Management LAN
Power Supplies
  • 1+1 1600W 80 PLUS Titanium redundant power supplies
I/O

    Front I/O

  • 2 x USB 3.2 Gen1 ports (Type A)
  • 1 x Power button with LED
  • 1 x ID button with LED
  • 1 x NMI button
  • 1 x Reset button
  • 2 x LAN activity LEDs (1x LED disabled)
  • 1 x Storage activity LED
  • 1 x System status LED
  • Rear I/O

  • 2 x USB 3.2 Gen1 ports (Type A)
  • 1 x Mini-DP
  • 1 x RJ45 port
  • 1 x MLAN port
  • 1 x ID button with LED
  • Backplane I/O

  • PCIe Gen5 x4 or SATA 6Gb/s or SAS4 24Gb/s
Expansion Slots
    Riser Card CRS201C:
  • 1 x FHHL x16 (Gen5 x16)

  • 1 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth
  • Support NCSI function
Dimensions
    Height: 87.5mm (3.44")
    Width: 438mm (17.32")
    Depth: 710mm (27.95")

Request A Quote

Get a quote for Gigabyte R264-S30 Server

If you know what you want but can't find the exact configuration you're looking for, have one of our knowledgeable sales staff contact you. Give us a list of the components you would like to incorporate into the system, and the quantities, if more than one. We will get back to you immediately with an official quote.

[email protected]