Powered by a single AMD EPYC processor, the Tyan Transport SX TN70AB8026 B8026T70AE24HR server is a 2U platform ideal for content distribution, big data applications, real-time analytics, and more. With 24x hot-swap NVMe drive bays along the front of the chassis, this system can increase transfer speeds for intensive workloads.
The Tyan Transport SX TN70AB8026 B8026T70AE24HR server features a single AMD EPYC processor from either the first or second generation. For a single-socket server, the memory capacity is able to support up to 1,024GB with 16x DDR4 ECC DIMM slots.
Other TN70AB8026 Chassis Configurations
Tyan Transport SX TN70AB8026 B8026T70AV2E24HR
Up to 24 NVMe U.2; 16 DIMM; 2 GbE; 2 NVMe M.2
Tyan Transport SX TN70AB8026 B8026T70AV8E16HR
Up to 16 NVMe U.2; 16 DIMM; 2 GbE; 2 NVMe M.2
Tyan Transport SX TN70AB8026 B8026T70AV18E8HR
Up to 8 NVMe U.2; 16 DIMM; 2 GbE; 2 NVMe M.2
Tyan Transport SX TN70AB8026 B8026T70AV16E8HR
Up to 8 NVMe U.2; 16 DIMM; 2 GbE; 2 NVMe M.2
Tyan Transport SX TN70AB8026 B8026T70AV26HR-LE
Up to 24x SATA; 16 DIMM; 2 GbE; 2 NVMe M.2
A single AMD EPYC processor from the 7001 or 7002 series powers the Tyan B8026T70AE24HR platform. The CPU supports either 8, 16, 24, or 32 cores with up to 64 threads. The single-socket server also supports up to 128 PCIe lanes and 8 memory channels. Migrating workloads to a single AMD EPYC CPU can increase savings in both CPU cost, power consumption, and potential software licensing fees.
The AMD-based platform has four memory channels and eight memory module sockets on each side of the single processor for a total of 16x active memory module slots. The Tyan TN70AB8026 B8026T70AE24HR chassis features DDR4 ECC registered (RDIMM) or load-reduced (LRDIMM) DIMMs with up to 1,024GB of memory. LRDIMMs are not supported when AMD EPYC 7002 series processors are deployed in all configurations. Memory speeds also differ from 2400 to 2666MHz depending on which CPU is installed.
The B8026T70AE24HR model is an all-NVMe storage server with 24x hot-swap 2.5-inch NVMe U.2 drive bays lining the front of the server. Additionally, there are two fixed 2.5-inch HDD/SSD drive bays on the rear with support for SATA at 6Gb/s that can be used to support the OS with redundancy. The NVMe drives are directly attached to the PCIe bus without the need for any PCI switches or port multiplication.
The Transport SX TN70AB8026 B8026T70AE24HR platform features 128 PCIe lanes with 6x PCIe slots on the rear. The system can be configured with an OCP v2.0 LAN mezzanine that can accommodate network speeds of up to 100 gigabits per second. For additional expansion, several half-height, half-length PCIe Gen3 x8 cards are available.
Featuring AMI MegaRAC firmware, the Transport SX B8026T70AE24HR supports an Integrated Platform Management interface 2.0 (IPMI 2.0) with iKVM and Redfish management protocol. The Aspeed AST2500 monitors the processor and memory temperature, as well as CPU, memory, and power supply voltage for at-chassis and remote management of the system.
The Tyan Transport SX TN70AB8026 B8026T70AE24HR is an all-NVMe storage server with 24x hot-swap 2.5-inch NVMe U.2 drive bays and 16x DIMM slots. A single AMD EPYC processor from the first- or second-generation powers the system and makes it easier and faster for workloads like e-commerce and video streaming to enhance business applications and critical workloads.
If you know what you want but can't find the exact configuration you're looking for, have one of our knowledgeable sales staff contact you. Give us a list of the components you would like to incorporate into the system, and the quantities, if more than one. We will get back to you immediately with an official quote.